1.0 A Voltage 50-1000V Diode Bridge Rectifier DF01 DF02 DF04 DF06
DF08 DF10
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
♦ This series is UL recognized under Component Index, file number
E54214
♦ Glass passivated chip junctions
♦ High surge overload rating-50 amperes peak
♦ Ideal for printed circuit boards
♦ High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs.
(2.3kg) tension
MECHANICAL DATA
Case: Molded plastic
Terminals: Plated leads solderable per MIL-STD-202,
Method 208
Mounting Position: Any
Weight: 0.04 ounce, 1.0 grams (approx)
Polarity: Marked on body
Typical Applications:
General purpose use in ac-to-dc bridge full wave rectification for
SMPS, lighting ballaster, adapter,
battery charger, home applicances, office equipment and
telecommunication applications.
Maximum Ratings & Thermal Characteristics
Rating at 25 C ambient temperature unless otherwise specified,
Resistive or Inductive oad, 60 Hz.
For Capacitive load derate current by 20%.
| Parameter | Symbol | DF005S | DF01S | DF02S | DF04S | DF06S | DF08S | DF10S | UNITS |
| Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | V |
| Maximum RMS bridge input Voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | V |
| Maximum DC Blocking Voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | V |
Maximum instantaneous forward voltage drop per leg at 1.0A | VF | 1.1 | V |
Maximum DC reverse current at rated TA =25 C DC blocking voltage per element TA =125 C | IR | 10 500 | μA |
Maximum average forward rectified output current at TA=40 C | IF(AV) | 1.0 | A |
Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) | IFSM | 50 | A |
| Rating for fusing ( t<8.3ms) | I 2 t | 10 | A2sec |
| Typical thermal resistance per element (1) | ReJA | 110 | ℃/W |
| Typical junction capacitance per element (2) | Cj | 25 | pF |
Operating junction and storage temperature range | TJ, TSTG | -55--150 | ℃ |
Notes: (1)Thermal resistance from Junction to Ambemt on P.C.board
mounting.
(2)Measured at 2.0MHz and applied reverse voltage of 4.0 volts.
Size:
Why choose us?
1. ISO9001:2008 certified factory
2. 20 years rich experience in the diode production
3. Strict quality control, achieve customer's maximum satisfaction
4. The Annual production capacity is over 2 billion
